Drywall
texturing can be done on walls or ceilings.
Since ceilings are the most exposed part of a
room, they are the ones that usually receive
the drywall texturing first. Texturing
of the ceiling helps cover up any taping
defects that may be made more noticeable with the reflection
of light. One of the most common texture techniques
used on ceilings is called “knockdown”.
Texture techniques for ceilings
To
do this type of drywall texturing you need
to have a sprayer to splatter a thin layer
of the plastering compound onto the ceiling.
Then you flatten it out using a wide taping
knife. Another way to apply drywall texture
to a ceiling is to mix the compound, paint
and aggregate and spray it onto the ceiling.
This mixture doesn't
need to be flattened out and the effect is that
of pebbles on the ceiling. You can also choose
to roll or swirl the mixture on for an even different
drywall texturing effect.
For
areas of the home where there is likely to
be a lot of moisture, it is best to leave the
ceiling smooth
and sanded. This makes it easier
to wipe off. Regular plastering rather than
drywall texturing techniques are better in
these rooms.
How to apply drywall texture to the walls
There
are different ways to apply texture to walls.
You can roll on the compound over the whole
wall with a paint roller. You can also spray
it on. After you apply drywall texture to the
walls, there are several techniques
you can use to enhance the look of the wall.
You can put small pieces of mirror glass all
over the wall, use a broad plastering knife
to have smooth places interspersed with rough
places. You can have the same effect on the
walls as you do on the ceilings – pebble
effect, using a sponge to make swirls, even using
a comb to make half or full circle designs.
Whatever
your choice, make sure that the drywall texture
pattern you choose is one you really want.
Taking off drywall is just as tedious as putting
it on and just as messy. However, a lot of
family fun can be had if everyone chips in
to help with the drywall texturing.
|
