Workbench
plans with workbench kits for the woodworker
Looking
for workbench plans together with workbench kits
and building your own workbench or just buying a good
solid woodworking bench. The decision most often leads
to getting workbench plans and doing it on your own. Building
a workbench according to a plan leaves enough room for
personal adaptation according to individual needs. So
whether it is changing the height or the size of the final
workbench or simply adding additional vises, if you follow
one of the better workbench plans, you will be
able to adapt the bench totally to your wishes.
Plans combined with
workbench kits
 From
your woodworking supplier or over the internet you
can get workbench plans alone or combined with kits.
These kits provide the basic hardware such as vises
and clamps. This saves a lot of time and lets you focus
only on getting the wooden parts. A good example are
Rockler's workbench plans combined with its hardware kit. You
can either get the plan alone or purchase the workbench
kit as well. The plan comes from issue no. 25 of Today's
Woodworker and leads to a workbench which is 30'' wide
and 80'' long. What is interesting about this plan is
that Rockler incorporates its T Slot system into the workbench.
 This
T slot system allows you to fix additional holders
and clamps to the workbench. One of these T slot clamps
is the Hold Down T-Slot Kit which gives you an extra
hand while working on the workbench table. It is the
same clamping system used on Rockler
router tables.
Garage workbench plans and kits for basic benches
Northerntools
offers 2x4 Basics AnySize™ Workbench Kit
where you just build a 36 inch high workbench according
to the workbench plans. You need to get and cut the lumber
parts, which are not included, and cut them according
to the plan. This workbench is a very inexpensive alternative
for anybody who is not looking for woodworking workbench
plans but for a decent Garage workbench kit. The rust–
and solvent–resistant resin legs give the workbench
the stability needed. The workbench holds up to 1000 lbs.
per shelf. Within the kit are 2 Finley multi–position
work holders and a detailed set workbench plans to assemble
properly. The lumber is not included, which allows you
to cut the workbench according to your needs.
To
sum it up, whatever workbench plans you get, whether it
is for woodworking benches or for simple garage auxiliary
benches, make sure they include a detailed parts list.
If you can get them together with workbench kits, then
it might be worse buying it, as you will save time and
money sourcing all parts like vises and clamps. Also,
check with your local woodworking shop and search the
web for the woodworking workbench plans you like.
|
